KN95 Protective Mask Foldable Particulate Respirator

Group Personal Protective Equipment
Min. Order 5000 kilogram
Terms of Payment L/C, D/A, D/P, T/T
Update Time 2020-07-02
Item specifics
Executive StandardEN 149:2001 + A1:2009
Particulate Filtration Efficiency≥95%
Shelf Life3 Years
MaterialMelt Blown Fabric, Non-Woven Fabric


KN95 Respirator-Use by the General Public-GB2626-2006/2019 Standard

KN95 is an industry standard and means that the mask provides the intended effectiveness of filtering 95 percent of particles with a mass median diameter of 0.3 micrometers. Therefore, our mask can protect you well from PM10, PM2. 5, and even smaller particles. Our masks are FDA Approved & CE certified and tested.


1. Tight fit to face.

2. Good comfortable.

3. N95 level protection.

4. Isolated droplets.

5. The mask is light and comfortable, you will forget to wear it within a few minutes

6. It has flexible upper side and ear hooks for easy placement

7. Filter out more than 95% of airborne particles and smoke

8. Static polypropylene non-woven fabric, keep healthy and safe when working or going out

9, ear-hook or strap-on, disposable, convenient, comfortable, portable

Cleaning & Storage

Cleaning is not applicable - disposable product.
Product should be stored in clean, dry conditions within the temperature range: -20℃ to +40℃ with a maximum relative humidity of<80%. When storing or transporting this product, use original packaging provided.

Testing & Certifications:

This PFE 95% filtration material has gone through rigorous testing and has passed all required certifications for use as the filter material in masks and respirators for blocking 95% of particles. It has passed the PFE (Particle Filtration Efficiency) Test. This test determines the material's filtration efficiency by passing aerosolized particles through the material at a constant flow rate and fixed air pressure. This test method complies with GB 2626-2006, EN149:2001+a1:2009.

Please Note: This filter material has only been tested PFE,not BFE. PFE testing is for particles smaller than those that meet BFE standards. Usually, disposal face mask test on BFE, and N95 mask test on PFE

This material has also been tested for breathability and has passed the necessary certification. It was administered and passed the Test, which complies with GB/T32616-2016, EN 14683:2019, Annex C. All test method criteria were met for this material. Testing was performed in compliance with the United States FDA (Food and Drug Administration) good manufacturing practice (GMP) regulations 21 CFR Parts 210, 211 and 820.

Test Standard of Melt Blown Fabric in Different Countries Below:

The other countries listed in the guidance and their associated product classifications
Product ClassificationsCountriesPerformance Standard
P2, P3Australia/New ZealandAS/NZS 1716:2012
PFF2, PFF3BrazilABNT/NBR 13698:2011
KN95, KP95, KN100, KP100ChinaGB2626-2006
FFP2, FFP3EuropeEN 149-2001
DS/DL2, DS/DL3JapanJMHLW-2000
Korea 1st classKoreaKMOEL-2017-64
N95, P95, R95
N99, P99, R99
N100, P100, R100

Factory and Machine:

Colors Available:

  • White