Embossed Release Film for Prepreg
Item specifics
- Tensile strength Mpa
- ≥14
- Elongation at break %
- ≥280
- Copper content ppm
- ≤20
- Manganese content ppm
- ≤10
- Acetone extract %
- ≤1.5
Review
Description
Poly Backer is a clear, low temperature plastic release film. With a meltpoint of 120 centigrade, it is designed for use in prepreg processing up to 120centigrade and will release from all resin system. Two type of Backer, perforated film and non-perforated film.Non-perforated film is used between tool and resin to prevent the resin stickto the tool. Perforated film can be applied in between prepreg and breatherfabric to prevent two resin from sticking. The thickness of the film is 0.16mm.
Technical Indicators |
---|
| ||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Film Specifications | ||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||
Note: In addition to the above specifications of products, we can also product as customer’s requirement. |